Moflash  Logo

 

 Home | Products | Bespoke | Product Demo | Distributors | Shows & Events | Company Info | Gallery | News | Catalogue | Contact Us

 

Beacons / Lights: Xenon/Strobe Visual Signals and Xenon/Strobe Visual & Audible Signals

Moflash Xenon beacons / lights have become one of the most popular warning beacons available on the market today.  They have a discharger capacitor operating through a converter circuit that ignites xenon gas inside a tube creating a brilliant flash of light. Xenon gas ignites virtually instantaneously so maximum brightness is obtained immediately. The Moflash Xenon range offers joule outputs varying from 1-25 joules. In addition, both the XA125 and X194 series have additional acoustic features offering a combined visual & audible signal.  The full range of Xenon beacons / lights including product specifications can be viewed below.  

 

APPLICATION: Xenon beacons are ideal for light and heavy industrial signalling applications, widely used on fire alarm applications and in process control/automation processes.

 

X80 Series (1-2 Joules)

Fully Assembled Flashing Beacon / Light

 

X125 Series (2-2.7 Joules)

Multi-Functional Flashing Beacon / Light

 

 X80 Series

 

Product Features

Continuously rated

Wide operating voltage

Two mounting options

Snap Fit

IP67

 

UK Distribution

Export Distribution

 

Colour Options:

Available in Amber, Red, Blue, Green and Clear

 

 

X125 Series

 

Product Features

Continuously rated

Surface, conduit box or wall mounting (except ES)

Optional wall bracket & guard available

2 point fix

IP65

 

UK Distribution

Export Distribution

 

Colour Options:

Available in Amber, Red, Blue, Green and Clear

 

The X80 is a flashing mode type of beacon (single stage alarm) suitable for a wide range of ‘local’ signalling applications where a low cost and energy efficient solution is required.

Xenon beacons (sometimes called strobes) are controlled via a PCB and put out a very brief but bright flash of white light by ionizing and then discharging a large current through the xenon gas.

The unit comes fully assembled and ready for installation and has two mounting options, stud mount or surface mount using a two piece fixing plate supplied. One plate is fixed to the appropriate surface the other to the beacon, the two plates then ‘snap fit’ together.

 

The X125 series are suitable for security, process control and light industrial applications where a lower cost and energy efficient solution is required.

These beacons are of the flashing mode type (single stage alarm) Xenon beacons (sometimes called strobes) are controlled via a PCB and put out a very brief but bright flash of white light by ionizing and then discharging a large current through the xenon gas. The design allows for termination inside the enclosure through the base.

 

 

 

X125 ES Series (2-2.7 Joules)

ES27 Edison Screw Cap Beacon / Light

 

X125 DIN Base Series (2-2.7 Joules)

Flashing Beacon / Light

 

  X125ES Series

 

Product Features

Continuously rated

Used in areas with existing

electrical lighting points

Optional wall bracket & guard available

2 point fix

IP65

 

UK Distribution

Export Distribution

 

Colour Options:

Available in Amber, Red, Blue, Green and Clear

 

 

 

 Moflash  X125 DIN Base Series

 

Product Features

Continuously rated

Surface or wall mounting

Optional wall bracket & guard available

3 point fix

IP65

 

UK Distribution

Export Distribution

 

Colour Options:

Available in Amber, Red, Blue, Green and Clear

 

The X125 ES series are suitable for security, process control and light industrial applications where a lower cost and energy efficient solution is required.

These beacons are of the flashing mode type (single stage alarm) Xenon beacons (sometimes called strobes) are controlled via a PCB and put out a very brief but bright flash of white light by ionizing and then discharging a large current through the xenon gas.

The ES version has an ES27 Edison Screw cap fitted into the base of the beacon. This design lends itself for use in temporary signalling locations where a warning or hazard is not normally present, or has the ability to be installed in an area using existing electrical lighting points, avoiding any additional wiring.

 

The X125 DIN base series are suitable for security, process control & generally light industrial signalling applications.

These beacons are of the Flashing mode type (single stage alarm) Xenon beacons (sometimes called strobes) are controlled via a PCB and put out a very brief but bright flash of white light by ionizing and then discharging a large current through the xenon gas. The design allows for termination inside the enclosure via an M12 sealing grommet in the base.

 

 

 

XA125 DIN Base (Audible) Series (2-2.7 Joules)

Acoustic & Xenon Beacon / Light

 

X194 Combination Series (2.5-5 Joules)

Acoustic & Xenon Beacon / Light

 

 Moflash  XA125 DIN Base Series

 

Product Features

Continuously rated

Surface or wall mounting

Optional wall bracket & guard available

3 point fix

IP65

 

UK Distribution

Export Distribution

 

Colour Options:

Available in Amber, Red, Blue, Green and Clear

 

 

 

 X194 Combination Series

 

Product Features

Continuously rated

Suitable for wall mounting

Sounder has 32 selectable tones

Red or White back box colour choice

IP65

 

UK Distribution

Export Distribution

 

Colour Options:

Available in Amber, Red, Blue, Green and Clear

 

The XA125 DIN base series are suitable for security, process control & generally light industrial signalling applications.

These beacons are of the Flashing mode type (single stage alarm) Xenon beacons (sometimes called strobes) are controlled via a PCB and put out a very brief but bright flash of white light by ionizing and then discharging a large current through the xenon gas. The design allows for termination inside the enclosure via an M12 sealing grommet in the base.

The XA version incorporates two piezo buzzers situated in the base of the unit that can either be synchronised to the flash rate or controlled independently of the light offering a combined audible & visual warning device.

 

The X194 combination series is suitable for status indication, process control & industrial applications.

These units offer a versatile range of multi signalling combinations. Beacons are fitted together to give up to five different colour sequences with the addition of an audible option giving a possible six stage alarm device. The Xenon beacons (sometimes called strobes) are controlled via a PCB and put out a very brief but bright flash of white light by ionizing and then discharging a large current through the xenon gas.

The design allows for termination in the uppermost beacon through an M20 knockout either through top or rear of the enclosure.

All signals can be controlled independently from each other.

 

 

 

X195/X197 Series (5 or 10 Joules)

Flashing Beacon / Light

 

X201/200 Series (10 Joules)

Single or Double Flashing Beacon / Light

 

 X195/X197 Series

 

Product Features

Continuously rated (Not X197)

Conduit box or wall mounting

Shallow and Deep Base Options

120° prime light above the vertical axis

IP65

 

UK Distribution

Export Distribution

 

Colour Options:

Available in Amber, Red, Blue, Green and Clear

 

 

 

 X201/200 Series

 

Product Features

Continuously rated

Surface, conduit box or wall mounting

High light output

2 point fix

IP65

 

UK Distribution

Export Distribution

 

Colour Options:

Available in Amber, Red, Blue, Green and Clear

 

The X195 and X197 are suitable for security, process control & general industrial signalling applications.

These beacons are of the Flashing mode type (single stage alarm) Xenon beacons (sometimes called strobes) are controlled via a PCB and put out a very brief but bright flash of white light by ionizing and then discharging a large current through the xenon gas. The design allows for termination inside the enclosure. The X195 deep base version offers 2 x M20 side knockouts and 1 x M20 rear. The shallow base (low profile version) allows for cable entry of up to 5mm on the side of the unit (x2) and 1 x M20 knockout at the rear.

The X197 high power version only allows for internal connection via the M20 rear knockout. Due to the power rating the unit has a rated ’On’ time of 2 hours in any six (see technical data sheet).

 

The X201/200 series is suitable for security & general industrial signalling applications where a more robust and powerful signal is required.

These beacons are of the Flashing mode type (single stage alarm) Xenon beacons (sometimes called strobes) are controlled via a PCB and put out a very brief but very bright flash of white light by ionizing and then discharging a large current through the xenon gas. The design allows for termination inside the enclosure.

This range of beacons incorporates an internal Fresnel lens designed to maximise the light intensity and has a double flash option (activated by a slide switch on the PCB) that extends the signal duration making it more noticeable to the human eye. The DC unit is factory set at 24v but a slide switch on the PCB can change it to 12v operation.

 

 

 

X201SD-200S Series (11 Joules)

Flashing Beacon / Light

 

X401/400 Series (10 Joules)

Double Flashing Beacon / Light

 

 X201SD-200S Series

 

Product Features

Continuously rated

High light output

Very robust construction

Surface or wall mounting

IP66

 

UK Distribution

Export Distribution

 

Colour Options:

Available in Amber and Red

 

 

 

 X401/400 Series

 

Product Features

Continuously rated

High light output

Surface, conduit box or wall mounting

3 point fix

IP65

 

UK Distribution

Export Distribution

 

Colour Options:

Available in Amber, Red, Blue, Green and Clear

 

The X201SD-200S series are suitable for security & general industrial signalling applications where a more robust and powerful signal is required.

These beacons are of the Flashing mode type (single stage alarm) Xenon beacons (sometimes called strobes) are controlled via a PCB and put out a very brief but very bright flash of white light by ionizing and then discharging a large current through the xenon gas. The design allows for termination inside the enclosure. The internal electronics are encapsulated with a resin compound to protect against the harshest of environments, also offering additional protection from vibration.

This range of beacons incorporates a Fresnel design on the outside lens designed to maximise the light intensity and has a double flash as standard on the DC versions, single flash on the AC version.

 

The X401/400 series are suitable for security & general industrial signalling applications where a more robust and powerful signal is required.

These beacons are of the Flashing mode type (single stage alarm) Xenon beacons (sometimes called strobes) are controlled via a PCB and put out a very brief but very bright flash of white light by ionizing and then discharging a large current through the xenon gas. The design allows for termination inside the enclosure.

This range of beacons incorporates an internal Fresnel lens designed to maximise the light intensity and has a double flash option (activated by a slide switch on the PCB) that extends the signal duration making it more noticeable to the human eye. The DC unit is factory set at 24v but a slide switch on the PCB can change it to 12v operation.

 

 

 

X450 Series (10 Joules)

Flashing Beacon / Light

 

X501/500 Series (24 Joules)

Flashing Beacon / Light

 

 X450 Series

 

Product Features

Continuously rated

High light output

4 x M20 cable entry options

Optional lens guard

IP66

 

UK Distribution

Export Distribution

 

Colour Options:

Available in Amber, Red, Blue, Green and Clear

 

 

 

 X501/500 Series

 

Product Features

Rated use only

Very high light output

M20 conduit side or bottom cable entry

3 point fix

IP65

 

UK Distribution

Export Distribution

 

Colour Options:

Available in Amber, Red, Blue, Green and Clear

 

The X450 series is suitable for Industrial & Marine signalling applications where a visual signal is required to operate in very harsh enviromental conditions.

The beacons are of the flashing mode type (single stage alarm). Xenon beacons (sometimes called strobes) are controlled via a PCB and put out a very brief but bright flash of white light by ionizing and the discharging a large current through the xenon gas in the tube.

The beacon has multiple flash rate settings, that can be set at installation, that range from 60 flashes per minute up to 180 flashes per minute to create a more noticeable warning signal to the human eye.

The units also have the ability to be fitted with a telephone initiation function and can be used as the second ring output indicator for telephones when installed in very noisy environments. Design allows for termination in the base.

 

The X501/500 series are suitable for industrial signalling applications where a very powerful signal is required.

These beacons are of the Flashing mode type (single stage alarm) Xenon beacons (sometimes called strobes) are controlled via a PCB and put out a very brief but very bright flash of white light by ionizing and then discharging a large current through the xenon gas. The design allows for termination inside the enclosure.

This range of beacons incorporates an internal Fresnel lens designed to maximise the light intensity and has a double flash option (activated by a jumper link on the PCB) that extends the signal duration making it more noticeable to the human eye.

The DC unit is factory set at 24v but a jumper link on the PCB can change it to 12v operation. The DC version is also supplied with a bi-lateral current limiter that must be used on all installations to protect the PCB from inrush current damage. Due to the power rating of the beacon it is not recommended for use in excess of 12 hours in any 24 hour period.

 

 

 

X700 Series (15 Joules)

Flashing Beacon / Light

 

 

 

 X700 Series

 

Product Features

Continuously rated

High light output

Surface or wall mounting

Multiple functionality

IP66/67

 

UK Distribution

Export Distribution

 

Colour Options:

Available in Amber, Red, Green & Clear

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The X700 series is suitable for Industrial & Marine signalling applications where a more powerful visual signal is required. These beacons are of the flashing mode type.

 

Xenon beacons (sometimes called Strobes) are controlled via a PCB and put out a brief but very bright flash of white light by ionizing and then discharging a large current through xenon gas in a tube.

 

This unit is designed to work both independently or as part of a synchronized string of beacons (maximum of 10 in a string) The design also incorporates a fault check mode when used in a Synchronous string that will show as a positive signal on the line and the string will stop flashing. Possible faults are Power failure, Synchronization failure, Capacitor failure or Tube failure.

 

The unit also offers a choice of four flash rates and two power settings.

 

Termination is via conduit knockouts on the sides of the unit and can incorporate M16 up to M32 cable glands.

 

Termination is inside the enclosure.

 

 

 Site Map | Privacy | Terms & Conditions | Contact Us

+44 (0) 121 446 5322

 Moflash Signalling Ltd © 2017