Skip to content


  • Continuously rated
  • Wide operating voltage
  • 120° prime light output from vertical axis
  • Dustproof and submersible in water


UV Stable Polycarbonate Lens
UV Stable Polycarbonate Base

Approvals & Conformities

Approvals & Conformities
Categories in this range.


X80 Series / KMX 75

(1-2 Joules)

Fully Assembled Flashing Beacon / Light – Industrial Xenon Beacons

The X80 is a flashing mode type of beacon (single stage alarm) suitable for a wide range of ‘local’ signalling applications where a low cost and energy efficient solution is required.

Xenon beacons (sometimes called strobes) are controlled via a PCB and put out a very brief but bright flash of white light by ionizing and then discharging a large current through the xenon gas.

The unit comes fully assembled and ready for installation and has two mounting options, stud mount or surface mount using a two piece fixing plate supplied. One plate is fixed to the appropriate surface the other to the beacon, the two plates then ‘snap fit’ together.


Code NoKM CodeVoltageLight SourceCurrent
X80-019819x18-30v Dc ---Xenon 1.0 J40 mA *
X80-029818x10-100v Dc ---Xenon 2.0 J110 mA *
20-72v Ac ~
X80-049820x115-230v Ac ~Xenon 2.0 J100 / 50 mA
* Average running current at 24v Dc over a 60 second cycle
X80 Series Industrial Xenon Beacons - Technical Drawing - Side
X80 Series Industrial Xenon Beacons - Technical Drawing - Base

Additional information

Lens Colour

Amber, Blue, Clear, Green, Red

IP Rating

IP 67

Maximum Temperature

+55 °C

Minimum Temperature

-20 °C


Fire, Industrial


FPM 60/65

Nominal Supply Voltage

48v, 115/230v

Light Source



UV Stable PC

Beacon Output


Current Type


AC Voltage Frequency

50/60 Hz

Power Rating

Close Proximity Signalling



Moflash Logo
Back To Top