Skip to content
Moflash LED-R401/400 LED rotating beacon

LED-R401/400 Rotating Beacon: the LED Upgrade for Halogen

The Moflash LED-R401/400 is an LED rotating beacon that replaces the traditional R401/400 halogen beacon. It uses 18 high-performance LEDs, while still fitting existing R401/400 brackets. As a result, it suits industrial and commercial sites moving to LED technology.

Moflash LED-R401/400 LED rotating beacon

Key specifications

LEDs
18 high-performance LEDs

Rotation
2 speeds

Lens colours
Amber, Red, Blue, Green, Clear

Power supply
12-24 V DC or 110-240 V AC

Protection
IP65

Power at 24 V
7.9 W, against 72 W for the halogen R401

Mounting
Fits R401/400 brackets

The Moflash LED-R401/400 LED rotating beacon.

Key features of the LED rotating beacon

  • 18 integrated LEDs, so the rotating signal stays bright.
  • Diode polarised version for the fire industry, while keeping the effect of a rotating beam.
  • 2 rotation speeds, so you can choose the best visibility for your site.
  • 5 lens colours, such as Amber, Red, Blue, Green and Clear.
  • Multi-voltage supply: 12-24 V DC or 110-240 V AC, therefore compatible with existing systems.
  • IP65 protection, so the beacon resists dust and water jets on industrial sites.

Halogen or LED: what changes?

R401/400 halogen

  • Halogen bulb
  • Bulb to replace regularly
  • 72 W at 24 V
  • R401/400 bracket

LED-R401/400

  • 18 high-performance LEDs
  • Up to 10 times longer life, so far fewer bulb changes
  • 7.9 W at 24 V
  • Same R401/400 bracket

How much energy does the LED rotating beacon save?

At 24 V, a traditional R401 halogen beacon uses 72 W, while the LED-R401 uses only 7.9 W. In other words, each beacon saves 64.1 W in continuous operation, a reduction of almost 90%. Over a full year of continuous use, that is about 560 kWh saved per beacon.

−90%

energy use at 24 V

64.1 W

saved per beacon in continuous operation

Up to 10×

longer life than halogen

Why choose the LED-R401/400?

  • Energy savings of up to 90%, because the LEDs draw far less power.
  • Long service life, up to 10 times longer than halogen, so maintenance costs fall.
  • Flexible use, since rotation options and 5 colours suit many applications.
  • Easy to install, because it fits R401/400 brackets.

Switch to LED technology and reduce energy consumption by approximately 90%, while benefiting from a significantly longer operating life and reduced maintenance costs. In addition, you help create a more sustainable environment.

Watch the LED-R401/400 in action

This 3D video shows the LED-R401 in detail: its features, its design and its lens colour options. You can also watch it on YouTube. Then, to compare models and voltages, visit the product page or contact our team.

Where to use the LED-R401/400

The LED-R401/400 suits industrial and commercial sites, especially where a strong rotating signal is needed. To choose the right colour and signal type, first read our guides to warning signal environments and visual warning signals.

Finally, if you want to replace halogen R401/400 beacons on your site, contact our team. They will then help you choose the right colour, voltage and rotation speed.

Related Articles

November 19, 2026Company news, Moflash News

Discover the New Moflash Website

Our new website has a modern design and brings Moflash and Clifford & Snell together, with all product documents and distributors in one place.

September 22, 2026Company news, Moflash News

Solar PV Grant Application for Our Birmingham Factory

Moflash Signalling has applied for a grant to fit rooftop solar PV at its Birmingham factory: a £45,000 project expected to produce 36,479 kWh a year.

February 9, 2026Awards, Moflash News

Moflash Named a Finalist for the GBCC Business Without Borders Award 2026

Moflash Signalling was one of eight finalists for the Business Without Borders award at the GBCC Awards 2026, held on 14 May 2026 at the ICC Birmingham.

November 3, 2025Company news, Moflash News

Moflash Signalling Completes Its Move to FAB-DIS 3.0

Moflash Signalling has completed its move to FAB-DIS 3.0 with ETIM classes, giving distributors richer and more reliable data for every Moflash and Clifford & Snell product.

March 20, 2025Company news, Moflash News

New Moflash Datasheets and Installation Sheets in 5 Languages

Moflash has redesigned the datasheets and installation sheets for its beacons and sounders: 5 languages, QR codes and updated technical data.

June 13, 2024Moflash News, Projects

420 Clifford & Snell Alarms for Emirates Steel Arkan

Moflash supplied 371 Clifford & Snell YL50 Hi-Vis sounder beacons and 49 YA80 sounders to upgrade the fire alarm system at Emirates Steel Arkan.

May 10, 2024Moflash News, Shows & Events

Clifford & Snell at the Fire Safety Event 2024, NEC Birmingham

Moflash exhibited Clifford & Snell at the Fire Safety Event 2024, NEC Birmingham, with the Yodac, Yodalarm and Yodalight Hi-Vis ranges and the LED-R401/400.

December 11, 2023Company news, Moflash News

Moflash Invests over £250,000 in a New SMT Production Line

Moflash has invested over £250,000 in a fully automated SMT production line built around a Mycronic MY300LX pick and place machine.

August 7, 2023Company news, Moflash News

Moflash Presents Its New Corporate Video

Watch the Moflash Signalling corporate video: our business, our products, our strengths and the Clifford & Snell brand.

May 19, 2023Moflash News, Product launches

Clifford & Snell Yodalight Hi-Vis LED Sounder Beacons

Clifford & Snell Yodalight Hi-Vis combines a high-intensity LED beacon with a powerful electronic sounder in one unit: YL50, YL80 and YL80 Super.