skip to Main Content

Features

  • Continuously rated
  • Optional wall bracket & guard available – see accessories
  • 2 point fix
  • 360° light output around the vertical axis
  • 180° light output above the horizontal axis
  • Dustproof and Weatherproof

Material

UV Stable Polycarbonate Lens
UV Stable ABS Plastic Base

Approvals & Conformities

Approvals & Conformities
Categories in this range.

Description

X125ES Series

(2-2.7 Joules)

Industrial Xenon Beacons

The X125ES series are suitable for security, process control and light industrial applications where a lower cost and energy efficient solution is required.

These beacons are of the flashing mode type (single stage alarm) Xenon beacons (sometimes called strobes) are controlled via a PCB and put out a very brief but bright flash of white light by ionizing and then discharging a large current through the xenon gas.

The ES version has an ES27 Edison Screw cap fitted into the base of the beacon. This design lends itself for use in temporary signalling locations where a warning or hazard is not normally present, or has the ability to be installed in an area using existing electrical lighting points, avoiding any additional wiring.

X125ES

Code NoVoltageLight SourceCurrent
X125ES-51115v Ac ~Xenon 2.3 J30 mA
X125ES-52230v Ac ~Xenon 2.7 J21 mA
X125ES Series Industrial Xenon Beacons - Technical Drawing

Brand

Moflash

Moflash Logo

Additional information

Lens Colour

Amber, Blue, Clear, Green, Red

IP Rating

IP 65

Maximum Temperature

+55 °C

Minimum Temperature

-25 °C

Application

Industrial, Process Control, Security

FPM

FPM 60

AC Voltage Frequency

50/60 Hz

Nominal Supply Voltage

115v, 230v

Light Source

Xenon

Material

ABS, UV Stable PC

Beacon Output

Flashing

Current Type

AC

Power Rating

Close Proximity Signalling

You may also like…

Back To Top