Moflash Logo

 

 Home | Products | Bespoke | Product Demo | Distributors | Shows & Events | Company Info | Gallery | News | Catalogue | Contact Us

 

Beacons / Lights: LED Beacons , Visual Signals and LED Visual & Audible Signals

Moflash LED beacons / lights offer a wide choice of light outputs, sizes, voltages and provides the option of selectable operation modes such as flashing or non-flashing (static / steady). In addition, the LEDA125 series also incorporates two piezo buzzers which are synchronised to the chosen operation mode offering a combined visual & audible signal. The LED450 is the newest addition to the range and being IP66, it is suitable for applications within very harsh environmental conditions. The full range of LED beacons / lights including product specifications can be viewed below.

 

APPLICATION: LED beacons / lights are ideal for industrial, fire and general status applications. The LED450 is suited to applications in Offshore installations and corrosive atmospheres.

 

LED80

Dual Function Beacon / Light

 

LEDD125

Multi-Functional Beacon / Light

 

Moflash LED80

 

Product Features

LED long life

Extra bright

10-100v Dc or 115-230v Ac

120° prime light output from vertical axis

IP67

 

UK Distribution

Export Distribution

 

Colour Options:

Available in Amber, Red, Blue and Green

 

 

Moflash LEDD125

 

Product Features

Continuously rated

LED long life + extra bright

Surface or wall mounting

3 point fix

IP65

 

UK Distribution

Export Distribution

 

Colour Options:

Available in Amber, Red, Blue, Green and Clear

 

The LED80 incorporates 12 ultra bright Surface Mount LEDs offering an economic solution for a wide range of general signalling solutions.

Ideally suited for local indication the beacon is controlled by either two wires (flashing mode) or three (static mode). The beacons are supplied fully assembled and ready for immediate installation.

The unit offers two mounting options, either Stud Mount or Surface Mounting using the two piece fixing plate supplied. One plate is fixed to the appropriate surface the other to the beacon, the two plates then ‘Snap Fit’ together.

 

The LEDD series is suitable for security, process control & industrial applications, where low maintenance and long life are the pre requisite requirement.

These beacons offer a three stage alarm option, selected by a jumper link on the PCB:

  • 1. Continuous mode
  • 2. Flashing mode at 1Hz
  • 3. Flashing mode at 2Hz

An advantage of the Continuous mode is that it can be controlled via a remote source (ie. control panel / plc etc ) offering the potential of remote flash option. The design for the DC unit allows for termination inside the enclosure via an M12 sealing grommet in the base. The AC units are supplied with a 1 metre flying lead.

 

 

 

LEDA125 (Audible Beacon) Series

Multi-Functional Beacon / Light with Two Piezo Buzzers

 

LED201/200 Series

Flashing / Rotating / Static Beacon / Light

 

 

 Moflash LEDD125

 

Product Features

Continuously rated

LED long life + extra bright

Surface or wall mounting

3 point fix

IP65

 

UK Distribution

Export Distribution

 

Colour Options:

Available in Amber, Red, Blue, Green and Clear

 

 

 

 Moflash - LED200/201 Long Life Beacon

 

Product Features

Continuously rated

LED long life

Extra bright

Surface, conduit box or wall mounting

IP65

 

UK Distribution

Export Distribution

 

Colour Options:

Available in Amber, Red, Blue, Green and Clear

 

The LEDA125 series is suitable for security, process control & industrial applications, where low maintenance and long life are the pre requisite requirement.

These beacons offer a three stage alarm option, selected by a jumper link on the PCB:

  • 1. Continuous mode
  • 2. Flashing mode at 1Hz
  • 3. Flashing mode at 2Hz

An advantage of the Continuous mode is that it can be controlled via a remote source (ie. control panel / plc etc ) offering the potential of remote flash option. The design for the DC unit allows for termination inside the enclosure via an M12 sealing grommet in the base. The AC units are supplied with a 1 metre flying lead.

The LEDA version incorporates two piezo buzzers situated in the base of the unit that are synchronised to the light mode (the buzzers can be controlled separately of the light on the DC version Only) offering a combined audible & visual warning device.

 

The LED201/200 is suitable for security, process control & industrial applications, where low maintenance and long life are the pre-requisite requirement.

These beacons offer a four stage alarm option, selected by a four way switch on the PCB:

  • 1. Continuous mode
  • 2. Flashing mode at 1Hz
  • 3. Rotating mode: Twin column
  • 4. Rotating mode: single column

An advantage of the continuous mode is that it can be controlled via a remote source (ie. control panel / plc etc) offering the potential of a remote flashing option. The design allows for termination inside the enclosure through the base.

 

 

 

LED401/400 Series

Flashing / Rotating / Static Beacon / Light

 

LED195 Series

Industrial LED Beacons

 

 Moflash - LED400/401 Long Life Beacon

 

Product Features

Continuously rated

LED long life + extra bright

M20 conduit side or bottom cable entry

Surface or wall mounting

IP65

 

UK Distribution

Export Distribution

 

Colour Options:

Available in Amber, Red, Blue, Green and Clear

 

 

 

LED195 Group

Product Features

Continuously rated

LED long life

Conduit box or wall mounting

120° Prime light output

IP65

 

UK Distribution

Export Distribution

 

Colour Options:

Available in Amber, Red, Blue, Green and Clear

 

The LED401/400 is suitable for security, process control & industrial applications, where low maintenance and long life are the pre-requisite requirement.

These beacons offer a four stage alarm option, selected by a four way switch on the PCB:

  • 1. Continuous mode
  • 2. Flashing mode at 1Hz
  • 3. Rotating mode: Twin column
  • 4. Rotating mode: single column

An advantage of the continuous mode is that it can be controlled via a remote source (ie. control panel / plc etc) offering the potential of a remote flashing option. The design allows for termination inside the enclosure through the base.

 

The LED195 beacon has been designed for industrial & commercial signalling applications where low maintenance & long life are the pre-requisite requirement.

These beacons have two stages of alarm, flashing (pre-set to either 60 or 120 FPM) or continuous (static) mode, selectable by a jumper link on the PCB.

The design also allows for a third wire connection giving the flexibility to switch from a pre-set static mode to a pre-set flashing mode. The design allows for termination inside the enclosure. The LED195 deep base version offers 2 x M20 side knockouts and 1 x M20 rear.

The shallow base (low profile version) allows for cable entry of up to 5mm on the side of the unit (x2) and 1 x M20 knockout at the rear.

 

 

 

LED TL Series (Surface Mount)

Industrial LED Traffic Light

 

LED TL Series - Factory Assembled

Industrial LED Traffic Light

 

 Traffic Light Series - Surface Mount - Group

 

Product Features

Continuously rated

LED long life + extra bright

120° Prime light output

Conduit or wall mounting

IP65

 

UK Distribution

Export Distribution

 

Colour Options:

Available in Amber, Red & Green

 

 

 

LED-TL-Bracket Mounted

Product Features

Continuously rated

LED long life + extra bright

120° Prime light output

Blue or white colour options available

IP65

 

UK Distribution

Export Distribution

 

Colour Options:

Available in Amber, Red & Green

 

The LED Traffic Light has been designed for industrial & commercial applications where a low maintenance, long life & cost effective solution for car park management, factory traffic control & automated gate & door control systems is required.

The traffic light units are suitable for indoor or outdoor applications and incorporate 36 high output LEDs. They can be surface mounted onto any flat vertical surface or conduit box and used as a stand-alone module. Alternatively, the modular design of the traffic light allows for multiple units to be pre-assembled by the installer to create a multiple indication light system. Each unit comes supplied as standard with all components required for multiple assembly for surface mount installation.

These units require external input signals or PLC control to switch visual indication functions (not supplied). However, the amber light incorporates an optional jumper link on the PCB that allows the unit to flash once energised.

Cable termination is inside the enclosure and can be accessed via either the 2 x M20 conduit knockouts (top or bottom) or 1 x M20 rear conduit entry.

 

The LED Traffic Light has been designed for industrial & commercial signalling applications where a low maintenance, long life and a cost effective solution is required. The TL system is suitable for car park management, factory traffic control, automated gate and door control systems.

The traffic light units are suitable for indoor or outdoor applications and incorporates 36 high output LED’s.

The factory assembled units are available in double (Red & Green) or triple (Red, Amber & Green) mounting configurations and are supplied fully assembled, pre-wired and mounted on wall brackets ready for immediate installation.

These units require external input signals or PLC control to switch visual indication functions (not supplied).

Termination is in the base of the bottom unit and can be accessed via 1 x M16 cable gland.

The mounting brackets allow the units to be off set against the mounting structure giving the traffic lights 180 degree of angle movement, optimising the visual indication position.

 

 

 

 

 Site Map | Privacy | Terms & Conditions | Contact Us

+44 (0) 121 446 5322

 Moflash Signalling Ltd © 2018