Home | Products | Bespoke | Product Demo | Distributors | Shows & Events | Company Info | Gallery | News | Catalogue | Contact Us

 

Explosion Proof Signal Accessories: Hazardous Area Signalling EXD Glands & Blanking Plugs

Our selection of Exd Glands and accessories are a required accompaniment to your Exd product. Conforming to high industry standards for safety requirements in explosion proof and hazardous area environments, they complement our Exd range of beacons/signalling and your cabling needs for installing the product. 

 

APPLICATION: This EXD range is suitable for applications in the following environments: Oil and Gas, On-shore and Offshore, Chemical, Petrochemical, Refineries & Marine locations.

 

E1EX Captive Component Gland

For Steel Wire and Aluminium Armoured Cable

 

A2EX Compression Gland

For Unarmoured Cable

 

Captive Component Gland

 

 

 

Product Features

Approved by ATEX, IECEx, INMETRO

SANS/IEC

Ex d IIC Gb, Ex e IIC Gb, Ex nR IIC Gc, Ex tb IIIC Db, II 2G, II 2D, II 3G Protection

Brass (Marine Grade Electroless Nickel Plated) or Stainless Steel

IP66/68

 

UK Distribution

Export Distribution

 

 

Product Features

Approved by ATEX, IECEx, INMETRO

SANS/IEC

Ex d II Gb, Ex e IIC Gb, Ex nR IIC Gc, Ex tb IIIC Db Protection

Brass (Marine Grade Electroless Nickel Plated) or Stainless Steel

IP66/68

 

UK Distribution

Export Distribution

  • For use indoors, outdoors and hazardous areas.
  • Two part handling, no loose parts, freely rotating captive cone ring, providing an armour clamp and earth bond without twisting the armour wires.
  • Captive Cone and Cone Ring provides an armour clamp and earth bond for steel wire and aluminium armour.
  • Patented disconnect system that allows inspection of armour clamp and inner seal after assembly.
  • Factory fitted with a specially formulated elastomeric seal for built-in safety, seals on the inner sheath of the cable. Seals on inner sheath to IP66/68.
  • Precision manufactured from high quality brass (marine grade electroless nickel plated) or stainless steel.
  • Complete with sealing gasket and an end cap safety gauge for correct gland selection.

 

  • For use indoors, outdoors and hazardous areas for Group II surface installations.
  • Inner seal seals on the cable sheath.
  • Outer seal grips the cable, giving superior cable retention and IP rating.
  • Precision manufactured from high quality brass (marine grade electroless nickel plated) or stainless steel.
  • Complete with a sealing gasket and an end cap safety gauge for correct gland selection.

 

 

 

E1EX-QS Barrier Gland

For Steel Wire and Aluminium Armoured Cable

 

A2EX-QS Barrier Compression Gland

For Unarmoured Cable

 

 

 E1EX-QS Barrier Gland

 

 

Product Features

Approved by ATEX, IECEx, INMETRO

SANS/IEC

Ex d IIC Gb, Ex e IIC Gb, Ex nR IIC Gc, Ex tb IIIC Db, II 2G, II 2D, II 3G Protection

Brass (Marine Grade Electroless Nickel Plated) or Stainless Steel

IP66/68

 

 UK Distribution

Export Distribution

 

 

 

 Barrier -Compression-Gland

 

Product Features

Approved by ATEX, IECEx, INMETRO

SANS/IEC

Ex d IIC Gb, Ex e IIC Gb, Ex nR IIC Gc, Ex tb IIIC Db, II2G, II 2D, II 3G Protection

Brass (Marine Grade Electroless Nickel Plated) or Stainless Steel

IP66/68

 

  UK Distribution

Export Distribution

  • For use indoors, outdoors and for Group II hazardous areas with unfilled hygroscopic multicore cables.
  • Two part handling, no loose parts.
  • Captive Cone and Cone Ring provides an armour clamp and earth bond for steel wire armour and aluminium armour.
  • Instantly mixed and injected resin.
  • Resin forms a 100% barrier seal around the individual cores of the cable.
  • Prevents gas and moisture transmitting down cable.
  • Prevents explosive gases transmitting down cable.
  • Precision manufactured from high quality brass (marine grade electroless nickel plated) or stainless steel.
  • Complete with sealing gasket.

 

  • For use indoors, outdoors and for Group II hazardous areas with unfilled hygroscopic multicore cables.
  • Instantly mixed and injected Resin.
  • Resin forms a 100% barrier seal around the individual cores of the cable.
  • Prevents gas and moisture transmitting down cable.
  • Prevents explosive gases transmitting down cable.
  • Precision manufactured from high quality brass (marine grade electroless nickel plated) or stainless steel.
  • Complete with sealing gasket.

 

 

 

Plugs

 

 

QuickStop-Ex

For Ufilled Hygroscopic Cable

 

 

 Blanking-Plugs

 

Product Features

Approved by ATEX, IECEx, INMETRO

SANS/SABS/IEC

Ex d I/IIC MbGb, Ex e I/IIC MbGb, Ex tb IIIC Db, IM2/II2GD Protection

Brass (Marine Grade Electroless Nickel Plated) or Stainless Steel

IP66/67/68 Parallel IP65 Tapered

 

  UK Distribution

Export Distribution

 

 QuickStop-EX

 

Product Features

Injected resin barrier gland

Easy to use

Quick setting

Displaces air in a multicore cable providing a 100% perfect barrier seal

 

  UK Distribution

Export Distribution

  • Precision manufactured from high quality brass (marine grade electroless nickel plated) or stainless steel.
  • Converts mismatching threads to the required thread.

 

  • For use indoors, outdoors and for Group II hazardous areas with unfilled hygroscopic multicore cables.
  • Instantly mixed and injected Resin.
  • Resin forms a 100% barrier seal around the individual cores of the cable.
  • Prevents gas and moisture transmitting down cable.
  • Prevents explosive gases transmitting down cable.
  • Precision manufactured from high quality brass (marine grade electroless nickel plated) or stainless steel.
  • Complete with sealing gasket.

 

 Site Map | Privacy | Terms & Conditions | Contact Us

+44 (0) 121 446 5322

 Moflash Signalling Ltd 2018