|
The RoHS Directive 2002/95/FC comes into force on 1st July 2006 and restricts the use of certain hazardous substances in electronic and electrical equipment within the European market. Although it is also widely referred to as the 'Lead Free Directive', But you should also take note that the following substances listed below are also restricted:
| |
Hazardous Substance
|
Allowed PPM Level
|
| |
| |
· |
Cadmium (Cd) |
100ppm (0.01%) |
| |
· |
Lead (Pb) |
1000ppm (0.01%) |
| |
· |
Mercury (Hg) |
1000ppm (0.01%) |
| |
· |
Hexavalent Chromium (CrVI) |
1000ppm (0.01%) |
| |
· |
Polybrominated Biphenyls (PBB's) |
1000ppm (0.01%) |
| |
· |
Polybrominated Diphenyl Eithers (PBDE's) |
1000ppm (0.01%) |
From 1st July 2006 any new electronic or electrical equipment sold in the EC must not contain these hazardous substances in excess of the permitted levels indicated above. However, the directive does allow provision for some specific exclusives such as lead in glass and ceramics etc. Equipment used for military and medical purposes, together with monitoring and control instrumentation, are also exempt.
Following the introduction of the RoHS Directive and the forthcoming restriction of lead in soldering materials different process parameter will be required to handle the new generation of solder alloys and board finishes. To assists those performing assembly, rework and repair operations the characteristics of RoHS compliant products have been categorised by JEDEC standards under three headings MSL (Moisture Sensitivity Level), PBT (Peak Body Temperature) and 2nd Level, Interconnect (Terminal Finish/Material).
Moflash conforms to the RoHs Directive
|