|
LED501/500 Series
|
- Conforms to ICAO [Annex 14]
- Static Red [none flashing] signal
- LED Long life
- Corrosion free
- IP65
Colours Available
|
Product Data Sheet
|
|
|
Installation Data Sheet
|
|
|
|
|
|
|
LED501/500
The Moflash LED501/500 Series conforms to the requirements of the ICAO for aviation obstruction marking. Each beacon contains six diode strips each with eight, horizontally aligned LED’s thus exceeding the minimum requirements of the ICAO of 10 cd explicit without dazzling. With robust, corrosion-free construction and rubber housing for vibration protection, the LED501/500 series is ideal for most low intensity applications.
Close
|
|
|
|
|
| |
|
|
|
|
LED-04-2000-02
|
- Conforms to ICAO [Medium intensity regulations 2000cd]
- Static Red [None flashing] signal
- IP67
- Visible over 15 miles clear air
- 360 visibility
Colours Available
|
Product Data Sheet
|
|
|
Installation Data Sheet
|
|
|
|
|
|
|
FF125
The LED 2000 Series conforms to the requirements of the ICAO for aviation obstruction marking. Designed for use on tall buildings, masts and pylons making it ideal for remote or inaccessible locations. The LED pentagon shaped tower, incorporating 800 high power LEDs, allows for a perfect 360o beacon which can be visible over 15 miles in optimum weather conditions. 3 meters of 1.5 SY steel braided cable is supplied attached to the beacon assembly making entery to the beacon unnecessary.
Close
|
|
|
|
|
| |
|
|
|
|
OLF-PS-10-02
|
- Conforms to ICAO Annexe 14 Volume 1 steady, red, low intensity Type A Beacons
- Lamp Life : 100,000 hrs
- Flash Settings : 20-60 time/min (adjustable)
- Automatic off mode after 18hrs in store
- Automatic operation when installed
- Automatic protection if battery is low
- Surface mounting option to suit 3 x M8 fasteners or 3/4 inch pipe mount
|
Product Data Sheet
|
|
|
Installation Data Sheet
|
|
|
|
|
|
OLF-PS-10-02
The OLF-PS-10-02 Solar Aviation Warning Light for Masts & Tower obstacles (Telecommunication, GSM, Radio & TV), tall cranes, chimney, tall buildings, sport stadiums, Light pylons, high voltage towers and any other potentially hazardous obstructions to air traffic. Steady or flashing red safety light, coupled with the latest LED technology, high grade silicon solar battery module, maintenance-free NiMH battery, the light will provide over 20 days of continuous operation in continuous rainy and cloudy days.
The built-in photocell switches ON&OFF at Dusk and Dawn. The ON/OFF level is between 70/100 Lux and the control is automatic. The beacon is of robust construction and can withstand harsh environments.
Close
|
|
|
|
| |
| |
|
|
|
|
OLF-02-10-02
|
- Conforms to ICAO Annexe 14 Volume 1 steady, red, low intensity Type A & Type B Beacons
- Also conforms to FAA and CAA requirements
- Low maintenance
- 200cd version available
- Photocell option available
|
Product Data Sheet
|
|
|
Installation Data Sheet
|
|
|
|
|
|
OLF-02-10-02
The OL 10 & 32 Candela series of LED low intensity aircraft warning lights incorporate a cost efective array inside a Cast metal lamp holder & toughened glass lens for harsh enviromental conditions. A power rating of less than 8 watts lends itself to photo cell control which is an optional extra with this series. The twin version gives a standby light option in case of power or lamp failure.
Close
|
|
|
|
|
|
| |
|
|
|
|
OLF-04-2000-02
|
- Conforms to ICAO Annexe 14 Volume 1 for steady, red, medium intensity Type C beacons, also flashing Type B
- Conforms to FAA & CAA requirements
- 5 year warranty
- 8 to 10 year life
- Low maintenance
- Tight beam spread reduces light pollution
- Optional mounting bracket available
|
Product Data Sheet
|
|
|
Installation Data Sheet
|
|
|
|
|
|
OLF-04-2000-02
The OL-04-2000-02 LED medium intensity aircraft warning light incorporates state of the art LED technology into an efficient optical design to give the performance needed to meet ICAO requirements. The light consumes less than 50 watts of power lending itself to possible solar applications.
The beacon has been designed for ease of installation with reduced size and weight. This beacon can be supplied as flashing or static and requires no additional cabling or monitoring
It can easily be syncronised with the use of an external controller.
The beacon is designed to withstand the dynamic conditions experienced in the most severe environments around the world
Close
|
|
|
|
|
|
| |
|
|
|
|
Mounting Options for LED501/LED500
5402 M 035435
|
|
|
