FF125 Series

The FF125 series operates through an internal circuit which simply cycles the lamp On and Off. These type of beacons generally give a much lower light output as it takes longer for the lamp to fully illuminate itself. These units are supplied with a filament lamp. In terms of light coverage, this type of beacon is more efficient as it illuminates the whole surface of the beacon constantly through 360 degrees. The FF125 series is ideal for low cost, local signal applications.

Close

FF125ES Series

The FF125ES Series operates through an internal circuit which simply cycles the lamp On and Off. These type of beacons generally give a much lower light output as it takes longer for the lamp to fully illuminate itself. These units are supplied with a filament lamp. In terms of light coverage, this type of beacon is more efficient as it illuminates the whole surface of the beacon constantly through 360 degrees. The ES Series is ideal for easy or temporary installation due to the E27 screw base.

Close

FF125 DIN Series

Suitable for fire, security & light industrial applications, these beacons are of the flashing mode type. Once the unit is energised the lamp will flash through a standard cycle of 60 FPM. Also available as a combined visual & audio version. The FFA version incorporates two Piezo sounders situated in the base that synchronised to the flash rate. An M12 sealing gromet in the base allows for cable entry and termination inside the enclosure.

(View the FFA125)

Close

FF201/200 Series

FF201/200 Series operates through an internal circuit which simply cycles the lamp On and Off. These type of beacons generally give a much lower light output as it takes longer for the lamp to fully illuminate itself. These units are available with either a filament or tungsten halogen lamp. The light output can be improved by the use of a Dioptric (Fresnel) or Reeded lens which is placed over the lamp capturing the light emitted, magnifying and directing it to increase the brightness of the visual signal. In terms of light coverage, this type of beacon is more efficient as it illuminates the whole surface of the beacon constantly through 360 degrees.

Close

FF401/400 Series

The FF401/400 Series operates through an internal circuit which simply cycles the lamp On and Off. These type of beacons generally give a much lower light output as it takes longer for the lamp to fully illuminate itself. These units are available with either a filament or tungsten halogen lamp. The light output can be improved by the use of a Dioptric (Fresnel) or Reeded lens which is placed over the lamp capturing the light emitted, magnifying and directing it to increase the brightness of the visual signal. In terms of light coverage, this type of beacon is more efficient as it illuminates the whole surface of the beacon constantly through 360 degrees. The 400/401 Series has a choice of side or bottom cable entries.

Close