Moflash Logo

 

 Home | Products | Bespoke | Product Demo | Distributors | Shows & Events | Company Info | Gallery | News | Catalogue | Contact Us

 

Explosion Proof Signals: Hazardous Area EXD Manual Call Points

CP150 & CP125 EXD Manual Call Points carry ATEX: II 2G Exd IIC T4 T6 (Incorporating IIA & IIB) approval and the CP135 Manual Call points carry ATEX: II 2G Exd IIB +H2 T4 - T6 (Incorporating IIA) for use in potentially explosive atmospheres, hazardous areas and very harsh environmental conditions. Customers can choose between the two options available: GRP (Glass Reinforced Plastic) and Stainless Steel. Manual call points are compatible for use with a PLC, DCS and ESD systems via 4-20mA output and ideally suited for use in fire alarm systems and an addressable option with diode fitted is available. The full range of Manual Call Points including product specifications can be viewed below.  

 

APPLICATION: The EXD Manual Call Point range is suitable for applications in the following environments: Oil and Gas, On-shore and Offshore, Chemical, Petrochemical, Refineries & Marine locations.

 

CP150 Series (GRP)

Explosion Proof Manual Call Point (GRP)

GRP: Glass Reinforced Plastic

 

CP125 Series (Stainless Steel)

Explosion Proof Manual Call Point

Stainless Steel

 

CP150 Glass Reinforced Plastic Series

 

Product Features

Approved by ATEX, IECEx

CQST (Available on request only)

ATEX: II 2G Exd IIC T4 - T6

(incorporating IIA & IIB)

Zones 1, 2, 21 & 22

Dustproof & Weatherproof

 

UK Distribution

Export Distribution

 

CP125 Stainless Steel Series

 

Product Features

Approved by ATEX, IECEx

CQST (Available on request only)

ATEX: II 2G Exd IIC T4 - T6

(incorporating IIA & IIB)

Zones 1, 2, 21 & 22

Dustproof & Weatherproof

 

UK Distribution

Export Distribution

The CP150 manual call point range has been approved for use in potentially explosive atmospheres and harsh environmental conditions.

Typical applications are Oil and Gas, On-shore and Offshore, Chemical, Petrochemical, Refineries & Marine locations etc.

It is compatible for use with a PLC, DCS and ESD systems via 4-20mA output. It is ideally suited for use in fire alarm systems and an addressable option with diode fitted is available.

The range also offers an additional visual LED indication option; red, green (or both) can be fitted. When fault or alarm status arises the green LED will be overridden by the red LED.

The design allows for termination inside the unit.

 

The CP125 manual call point range has been approved for use in potentially explosive atmospheres and harsh environmental conditions.

Typical applications are Oil and Gas, On-shore and Offshore, Chemical, Petrochemical, Refineries & Marine locations etc.

It is compatible for use with a PLC, DCS and ESD systems via 4-20mA output. It is ideally suited for use in fire alarm systems and an addressable option with diode fitted is available.

The range also offers an additional visual LED indication option; red, green (or both) can be fitted. When fault or alarm status arises the green LED will be overridden by the red LED.

The design allows for termination inside the unit.

 

 

 

CP135 Series (GRP)

Explosion Proof Manual Call Point (GRP)

GRP: Glass Reinforced Plastic

 

 

 

 

 

CP135 Glass Reinforced Plastic Series

 

 

 
Product Features

Approved by ATEX, IECEx

CQST (Available on request only)

ATEX: II 2G Exd IIB +H2 T4 - T6

(incorporating IIA)

Zones 1, 2, 21 & 22

Dustproof & Weatherproof

 

UK Distribution

Export Distribution

 

 

 

 

The CP135 manual call point range has been approved for use in potentially explosive atmospheres and harsh environmental conditions.

Typical applications are Oil and Gas, On-shore and Offshore, Chemical, Petrochemical, Refineries & Marine locations etc.

It is compatible for use with a PLC, DCS and ESD systems via 4-20mA output. It is ideally suited for use in fire alarm systems and an addressable option with diode fitted is available.

The range also offers an additional visual LED indication option; red, green (or both) can be fitted. When fault or alarm status arises the green LED will be overridden by the red LED.

The design allows for termination inside the unit.

 

 

 

 Site Map | Privacy | Terms & Conditions | Contact Us

+44 (0) 121 446 5322

 Moflash Signalling Ltd 2018