Moflash Logo

 

 Home | Products | Bespoke | Product Demo | Distributors | Shows & Events | Company Info | Gallery | News | Catalogue | Contact Us

 

LED Beacons / Lights: Eco Beacons

The LED Eco static or flashing beacons / lights offer a wide choice of light outputs, sizes, voltages and provides the option of selectable operation modes such as flashing or non-flashing (static / steady). The full range of LED beacons / lights including product specifications can be viewed below.

 

APPLICATION: The Economy series are suitable for light commercial & industrial signalling applications where local indication is required. The LED-TLM tower / stack signal series is ideal for the process and status control industry.

 

LED100 and LEDES100 Series

Flashing or Static Beacon / Light

 

LEDS100 Series

Multi-Functional Beacon / Light

 

 LED100 & LEDES100

 

Product Features

Continuously rated

LED long life

Low current consumption

2 point fix

Dustproof and Weatherproof

 

UK Distribution

Export Distribution

 

Colour Options:

 

 

 LEDS100

 

Product Features

Continuously rated

LED long life

Low current consumption

2 stud fix

Dustproof and Weatherproof

 

UK Distribution

Export Distribution

 

Colour Options:

 

The LED100 economy series is suitable for light commercial & industrial signalling applications where local indication is required.

These beacons have two selectable stages of alarm, flashing or continuous (static) mode, selectable by a jumper link on the PCB. The design also allows for a third wire connection giving flexibility to switch from a pre-set static mode to flashing (Not ES Version).

The LED ECO range has been designed predominantly to offer a cost effective solution against more traditional incandescent types of lamps, whether through new plant and machinery installations or existing facility upgrades. The design allows for termination inside the enclosure through the base (Not ES Version).

The ES Version has an E27 Edison Screw Cap fitted into the base of the beacon. This design lends itself for use in temporary signalling locations where a warning or hazard is not normally present, or has the ability to be installed in an area using existing electrical lighting points, avoiding any additional wiring.

 

The LEDS100 economy series is suitable for light commercial & industrial signalling applications where local indication is required.

These beacons have two selectable stages of alarm, flashing or continuous (static) mode, selectable by a jumper link on the PCB. The design also allows for a third wire connection giving flexibility to switch from a pre set static mode to flashing.

The LED ECO range has been designed predominantly to offer a cost effective solution against more traditional incandescent types of lamps, whether through new plant and machinery installations or existing facility upgrades.

This design allows for termination inside the enclosure through the base of the beacon, either from directly below or using a 6mm cabling channel at 90o to the base for surface cabling. The LEDS version incorporates two mounting studs 2 x 5mm on 45mm centres.

 

 

 

LEDD100 Series

Multi-Functional Beacon / Light

 

LED-TLM Series

Stacking Beacon / Light

 

 

 LEDD100

 

Product Features

Continuously rated

LED long life

Low current consumption

3 point fix

Dustproof and Weatherproof

 

UK Distribution

Export Distribution

 

Colour Options:

 

 

LED-TLM

Product Features

Continuously rated

LED long life

Low current consumption

Suitable for surface mounting

Dustproof and Weatherproof

 

UK Distribution

Export Distribution

 

Colour Options:

 

The LEDD & LEDA 100 economy series are suitable for light commercial & industrial signalling applications where local indication is required. These beacons have two selectable stages of alarm, flashing or continuous (static) mode, selectable by a jumper link on the PCB. The design also allows for a third wire connection giving flexibility to switch from a pre-set static mode to flashing.

The LED ECO range has been designed predominantly to offer a cost effective solution against more traditional incandescent types of lamps, whether through new plant and machinery installations or existing facility upgrades. The design allows for termination inside the enclosure through the base of the beacon enclosure.

The LEDA version incorporates one piezo buzzer situated in the base of the unit that is synchronised to the flash rate (the buzzer cannot be controlled independently of the light) offering a combined audible & visual warning signal.

 

The LED Tower Light Module series is ideally suited for status indication in light commercial & industrial signalling applications where a local signal is required. These beacons have two selectable stages of alarm, flashing or continuous (static) mode, selectable by a slide switch on the PCB.

The LED TLM ECO range has been designed predominantly to offer a cost effective solution against more traditional incandescent types of lamps, whether through new plant and machinery installations or existing facility upgrades.

The design is modular and is easily assembled. Colour modules are supplied with quick fix terminations that simply push into male terminal in the module below to make a connection. Customer connections are into the base unit only.

Audible modules are also available. The two ECO sounders units (Dc or Ac) offer up to 100dB and are either continuous or pulsed tone and rated at IP54. An additional high output sounder unit offers up to a 120dB and is either continuous or pulsed tone and is rated at IP65. Data sheets available.

 

 

 

LEDA100 (Audible Beacon) Series

Multi-Functional Beacon / Light with one buzzer

 

LED-MINI Series

Stacking Beacon / Light

 

 LEDA100 Audible Beacon

 

Product Features

Continuously rated

LED long life

Low current consumption

3 point fix

Dustproof and Weatherproof

 

UK Distribution

Export Distribution

 

Colour Options:

 

 

LED-MINI

 Product Features

 

 Continuously rated

 

 LED long life

 

 Low current consumption

 

 Economical

 

 360į light output around the vertical axis

 

UK Distribution

Export Distribution

 

 Colour Options:

 

The LEDD & LEDA 100 economy series are suitable for light commercial & industrial signalling applications where local indication is required. These beacons have two selectable stages of alarm, flashing or continuous (static) mode, selectable by a jumper link on the PCB. The design also allows for a third wire connection giving flexibility to switch from a pre-set static mode to flashing.

The LED ECO range has been designed predominantly to offer a cost effective solution against more traditional incandescent types of lamps, whether through new plant and machinery installations or existing facility upgrades. The design allows for termination inside the enclosure through the base of the beacon enclosure.

The LEDA version incorporates one piezo buzzer situated in the base of the unit that is synchronised to the flash rate (the buzzer cannot be controlled independently of the light) offering a combined audible & visual warning signal.

 

 

The LED Mini tower light modules are ideally suited for status indication in light commercial signalling applications where a low cost, compact and local signal is required. These beacons are of the continuous/static mode type (single stage alarm) Once the beacon is energised the LEDís will stay permanently on.

An advantage of this type of operation is that It can be controlled via a remote source (ie control panel / plc etc) giving the beacon greater flexibility by offering a (flashing) second stage alarm.

The design is modular and is easily assembled. Colour modules are supplied with quick fix termination that simply push into male terminals in the module below to make the connection.

The two base mounting options are available, Foot & 100mm pole or a Side Bracket & 100mm pole each base is supplied with a 1 metre flying lead.

 

 Site Map | Privacy | Terms & Conditions | Contact Us

+44 (0) 121 446 5322

 Moflash Signalling Ltd © 2016